Resist

resistance module for use with Folktek Matter and Conduit

Resist is currently available exclusively via folktek.com: http://folktek.com/instruments/modular/resist 
Resist is a simple module - 4 buffered potentiometers (knobs) which are routed to 4 different corresponding 3 point headers. Essential added control for any current or future Folktek module utilizing the header patchbay.

Matter:

With Matter, Resist changes the game completely, adding a whole world of possibilities and expanding the sound and play-ability exponentially:

• Use the jumpers to attenuate incoming CV/gate by jumping from the CV in on Matter to Resist and then to the main 1-20 patchbay. With the simple attenuation, aspects of Matter have much more control - changes in pitch, filtering, resonance etc. over sounds that were once much more static. Send the CV to the center of the header and send two jumpers to the main 1-20 patchbay and there begins to form a matrix, thereby deepening the sound. Jump one of the points already in Resist to another header, on to the main 1-20 and it goes deeper still...

• Direct jumping from the Matter main patchbay to Resist allows Matter to become a controllable drone synth as pitch, filter, resonance, noise controls all become possible.

• Add a CV sequence to an established drone by jumping into Matter CV in and develop rich, synchronized sequenced drone.

Conduit:

• Jump oscillations from Conduit to Resist and back to Conduit and there are now level controls for the oscillations.

• Attenuate incoming CV controlling vactrols to adjust power and intensity.

• Attenuate oscillations jumped to the delay input (which will also add control over the envelope follower (cv out)

• Jump Conduit oscillations or delay out first to Resist, then to Matter to control Conduit levels in Matter circuitry.

http://folktek.com/instruments/modular/resist

• Module does not draw current
• 2 mm Depth
• Ø 5.00 (1 Votes) Average Rating