AUDIENT iD14 AUDIO INTERFACE
iD14 delivers the audio performance of a large format console in a compact and elegant desktop package. iD14 provides a pair of world-class Audient console mic pres, class-leading Burr Brown converter technology, console style monitor control, JFET D.I and the revolutionary ScrollControl. With its versatile feature set and intuitive layout, iD14 will become the hub of your studio in no time.
- 10-in/4-out USB Audio Interface
- 2 x Class-A Audient Console Mic Preamplifiers
- High Performance Burr Brown AD/DA Converters
- iD ScrollControl Mode
- 1 x Discrete JFET Instrument Input
- Main Speaker Output
- Independent Class-AB Headphone Output
- Full Monitor Control Functionality (software controlled)
- ADAT Input for Expandability
- Low Latency DSP Mixer
- USB2.0 Bus Powered
- 24bit/96khz
- All-Metal Enclosure
- Over £500 worth of plugins and software with ARC
MICROPHONE PREAMPLIFIER:
(measurement includes ADC signal path)
| MIC GAIN: | 0 to 66 dB (inc. +10 dB software boost) |
| LINE GAIN: | -10 to 56 dB (-10dB hardwired line pad) |
| PHANTOM POWER: | 48V ±4V @ 10mA/Channel (12VDC only)* |
| MIC EIN: | <-127.0 dBu |
| CMRR: | >80 dB @ 1kHz |
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital Maximum) |
| INPUT IMPEDANCE (Mic): | 2.8 kΩ Balanced |
| INPUT IMPEDANCE (Line): | >8kΩ Balanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain |
| CROSSTALK: | <-90 dBu |
| THD+N @ 0dBu (1kHz): | 0.0025% (-92 dBu) |
| SNR: | 96 dB un-weighted, 99 dB A-weighted |
| XLR Combi Female | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
D.I (Channel 1):
| D.I GAIN: | 0 to 66 dB (inc. +10 dB software boost) |
| MAXIMUM INPUT LEVEL: | +9 dBu (0.6% THD typical) |
| INPUT IMPEDANCE: | >500kΩ Unbalanced |
| FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz |
| THD+N @ 0dBu (1kHz): | <0.04% all musical 2nd and 3rd harmonics |
| SNR: | 95 dB un-weighted, 98 dB A-weighted |
| 1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):
(measured sans microphone preamplifier under AES-17)
| MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.002% (-94 dB) |
| THD+N @ -6dBFS (1kHz): | <0.0015% (-97 dB) |
| DYNAMIC RANGE: | 113 dB un-weighted 116 dB A-weighted |
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):
(measured under AES-17 at line outputs 1&2)
| MAXIMUM OUTPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| OUTPUT IMPEDANCE | <100Ω |
| FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
| CROSSTALK: | <-105 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.003% (-90.5 dB) |
| DYNAMIC RANGE: | 114 dB un-weighted 117 dB A-weighted |
| 1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
HEADPHONE OUTPUT (DAC 3&4):
(measured under AES-17 at phones output)
| MAXIMUM OUTPUT LEVEL: | +12 dBu |
| DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
| VOLTAGE GAIN: | +6 dB (optimised for loudness) |
| OUTPUT IMPEDANCE: | <30 Ω Balanced |
| FREQUENCY RESPONSE: | ±1.0 dB 10Hz to Fs/2 (load dependant) |
| CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.002% (-94 dB) |
| DYNAMIC RANGE: | 108 dB un-weighted 111 dB A-weighted |
| MAX LEVEL INTO 30ohms: | +4 dBu, 0.005% THD+N, Power: 101mW |
| MAX LEVEL INTO 60ohms: | +5 dBu, 0.004% THD+N, Power: 64mW |
| MAX LEVEL INTO 600ohms: | +13 dBu, 0.0025% THD+N, Power: 39mW |
| 1/4” JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
DIGITAL INPUT:
| 8-CHANNEL ADAT: | 44.1kHz to 48kHz |
| 4-CHANNEL ADAT: | 88.2kHz to 96kHz SMUX |
| STEREO S/PDIF / TOSLINK | 44.1kHz to 96kHz (Stereo) |
USB 2.0 HIGH SPEED:
| BUS POWER: | 500mA @5V System Limit 425mA @5V Maximum (No 48V) (Phantom power only available on 12VDC)* |
| No. of INPUT CHANNELS: | 10 (2 Analogue, 8 Digital) |
| No. of OUTPUT CHANNELS: | 4 (4 Analogue) |
| DSP MIXER LATENCY: | ROUND TRIP (in-to-out)
44.1kHz 1.660ms |
POWER SUPPLY:
12VDC Centre Positive - 1.25A (required for full 48V Phantom Power)*
* iD14 requires a lot of power for class leading converters and class-A microphone preamplfiers. We could not beat the laws of physics so an external supply is required for 48V phantom power. Your microphones will thank you when they get enough voltage!
You may also like
More from AUDIENT
More from STUDIO
Recently viewed